|
| . Introducing the latest in lug nut technology from Kics Project of Japan! Endorsed by Japanese race teams, these seven sided heptagonal lug nuts come in a complete set of 20 lugs along with a key. The unique feature of this patent pending lug nut is that each lug consist of 2 peices, where the top of the lugs spin freely from the tapered centering ring. This ensures a much tighter and precise hold than traditional lug nuts. It also minimizes the chances of scratching your wheels. Made of lightweight composite materials, these open ended lugs fit on both standard studs as well as extended studs. The entire set weighs just under 2 lbs! Highly recommended for both street and track enthusiasts. Kicks Project R40 Lug Nuts are for those that demand only the best! |
|
|
| . If you have a vehicle you don't use every day, just connect our CTEK battery charger and relax. If the battery is low, the compact unit will recharge it at an optimal rate, varying both current and voltage automatically. When the battery is fully charged, this brainy charger will change over to a maintenance mode to keep your battery in top condition--for longer battery life. |
|
|
| . Vibrant Metal Core Catalytic Converters are superior to traditional ceramic core converters in many ways: • 100% Stainless Steel construction • Metal Monolith is much more resistant to the effects of vibration than traditional ceramic bricks. • Capable of withstanding higher operating temperatures. • 300 cell per Sq. Inch catalyst flows at 578 CFM, up to 40% better than a typical ceramic core converter. • Suitable for use on engines up to 5.0L • 50,000 Mile Limited Warranty |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| . We are running a Group Buy on Work Wheels. Call us for the sale price! |
|
|
| In Stock, Ready to Ship! 17 x 8.0 (+38) 5 x 114.3mm Was: $3,080.00 Now: $2,700.00 |
|
|
| In Stock, Ready to Ship! 18 x 9.0 (+29mm) 5 x 114.3 Was: $2,360.00 Now: $2,020.00 |
|
|
| . Engine builders have grown increasingly concerned that many modern motor oils do not provide adequate wear protection for new engines, particularly those using flat-tappet cams. Royal Purple has created an engine break-in oil specifically to address this problem. Royal Purple Engine Break-in Oil is formulated to allow optimal ring seal. It also protects rotating assembly components, such as the camshaft and valve train from initial start up wear. Royal Purple combines highly refined mineral oil, preferred for engine break-in, with advanced additives containing high levels of zinc and phosphorus to optimize protection in flat tappet and roller engines. |
|
|
| . With more than 120 years of experience in the oil industry, Nippon Oil, the manufacturer of ENEOS OIL products are amongst the top oil companies in the world. With the collaboration it has with numerous major Japanese car companies, Nippon Oil (Eneos Engine Oil) has the know-how and experience to formulate top quality motor oil for both Japanese and other vehicles alike. |
|
|
| Free Shipping* A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-channel wideband UEGO controller and gauge display into one unit, uniting unsurpassed AFR accuracy and control with an easy-to-read interface. This unit works with virtually any stand-alone engine management system. |
|
|
| . Rays Engineering Japan is a name synonymous with some of the world's best and most sought out racing wheel. In conjuction with Rays Engineering Japan, we at Seibon International are proud to offer our limited edition Volk Racing Te37 Race Wheel. Adorned in its true "Time Attack" color scheme, this light-weight wheel is flat grey in color with the signature RED outer. Be one of the few to own a piece of history as this collaboration are not often offered. |
|
|
| . GReddy Blow Off Valves are easily adjustable to eliminate compressor surge and preventing premature boost leakage, while increasing boost response between shifts. Each valve is made of durable cast and billet aluminum frame and the valve to diaphragm ratio provides performance that cheap piston types cannot offer. The spring stiffness adjustment screw and the three different sizes give the GReddy user the option to match vehicles with mild upgrades to heavily tuned engines. |
|
|
| . The HKS Super Sequential Blowoff Valve (SSQV) is a dual stage pull type relief valve. Unlike other blow off valves that are push type, the SSQV will not leak under high boost conditions nor under vacuum at idle. Being of a pull type valve structure, the SSQV can not physically leak under any level of boost because boost pressure also keeps the valve closed against its seat. The SSQV is actuated by pressure alterations only, not by the rate of pressure or vacuum in the line, which ensures a quick valve response and complete closure during idle. |
|
|
| . The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the B, D, H and F series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors. |
|
|
| . GReddy Racing Ti-C Cat-back Exhausts combine the design, looks and flow of our Full Racing Titanium systems with the durability, deep sound, value and large application list of our other Stainless Steel street systems. This fusion of aggressive styling and practical construction, makes this the logical choice for both Race and Street Enthusiasts. It improves high and mid-range performance while still allowing for suitable sound levels when used with the included tuned Tri-mounted Silencer*. |
|
|
| Free Shipping* AUTOTECH brings new technology to the high performance differential market with the new Wavetrac Differential. A torque biasing differential with a difference... Enhanced No-Load Bias Ratio via its Wave Design Center Pack. |
|
|
| . The COBB Tuning AccessPORT reprograms your vehicle’s computer to optimize the air/fuel ratio and ignition timing, increase boost, remove the speed limiter, and more for performance results you can instantly feel! Using our off-the-shelf staged maps, the AccessPORT can unlock the potential of your vehicle by as much as 50hp, and more based on further modifications. The possibilities are endless since the AccessPORT is a short ProTUNE away from giving your car even more potential from the staged maps. |
|
|
| Free Shipping* The Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box - no additional parts required. |
|
|
| . Revo's Racing Short Shifter Racing short shifter is often regards as the single most important upgrade for high performance vehicle. To fully realize the racing potential for the all-new Honda Civic 2001 and Acura RSX 5 speed/Type S, the design team at Revo Technica has custom developed a racing short shifter to enhance the performance and driving pleasure of this new generation Honda Civic and Acura RSX. |
|
|
| Free Shipping* Turbonetics is proud to release the brand new line of GT-K Turbochargers. The GT-K family has been designed for maximum performance utilizing the most advanced turbocharger engineering and components. This next generation of turbo units features special Map Enhancement Porting to allow the compressor wheel to operate at its maximum efficiency across a very broad rpm range. |
|
|
| . Dual Ball Bearing GT28RS turbo assembly with T25 style turbine inlet. Comes with internal wastegate pre-assembled. This turbo is great for small displacement engines up to 2.2L and has the ultimate spool up time compared to other units. This turbo has a flow capacity of about 350HP. This turbo would be comparable to the HKS GT2530. |
|
|
| . Turbo is the newest addition to the Garrett Ball Bearing Line up. It fills in the requirements for small displacement 4 cyl. engines and has a excellent response characteristics. It spools up 1,000 RPM sooner than the older GT30R. The Dual Ball Bearing GT3071R Turbo comes assembled with T3 style turbine housing with T3 inlet flange. Turbine housing style available in Standard GT or with T3/T4 Ford Style 5 bolt turbine housing. Compressor housing is T04E frame size with 2.00 outlet. Compressor inlet is available with 2.75 or 4.00 inlet. |
|
|
| . Dual Ball Bearing GT30R Turbo assembly with T3 style housing with T3 inlet flange w/ 4 bolt style exit. T04E style compressor housing with 4.00 inlet and 2.00" outlet. Very Good response turbo for 4 Cyl applications. This turbo has a flow capacity of about 500HP. This turbo would be the same as HKS GT3037. The GT30R turbine housings with 4 bolt exit are made out of ductile Ni-Resist iron (has a nickel content of about 38%). This material is much better at withstanding high exhaust gas temperatures than regular cast iron. |
|
|
| . Dual Ball Bearing GT35/GT40R Turbo assembly. T3 style inlet flange with default GT 4 bolt style exit. Large T04S style compressor housing with 4.00 inlet and 2.50" outlet. Hi HP 4-6 Cyl applications. This turbo has a flow capacity of about 600HP. |
|
|
| Free Shipping* The solid lifter conversion replaces the factory hydraulic lifters and comes with all necessary hardware for a straightforward installation. These Conversion Kits are perfect for anyone upgrading the factory valvetrain and/or camshafts in their sport compact engine. Click on the application link above to find your vehicle. |
|
|
| Cam Lock Design The 3” wide racing harness for mounting in a 4-seater car is FIA-certified for racing safety. Safety equipment comes standard with cam lock buckle device, belt length adjusters, fasteners for attachments to eye bolts and four short eye bolts for easy installation and removal. |
|
|
| . Tomioka Racing Super Slopes are designed to help car enthusiast with lowered vehicles to reach all front, side and rear jack point areas. These plastic car ramps are sold in sets of 2 and also work great for those low profile cars that you need just a small amount of lift to get a hydraulic jack under the body or ground effects kits. These plastic ramps are the only solution for cars with expensive ground effects for getting a jack under the vehicle to lift it for an oil change or other undercarriage service. |
|
|
| . The GReddy e-manage Ultimate does what no other piggyback ECU can, engineered to preserve the best features of the original e-manage (Economically priced, there is no need for tuning from scratch and it is compatible with most Japanese performance vehicles). Some of the new Ultimate features include; add and subtract fuel and ignition maps, a two-preset memory, A/F Target Map (for self tuning), built-in adapters and correction maps, and extensive data logging with Map Tracing for easier tuning. |
|
|
| In Stock, Ready to Ship! 15 x 6.5 (+38mm) 4 x 100 Was: $700.00 Now: $500.00 |
|
|
| In Stock, Ready to Ship! Honda - Civic Si (2006-08) 2/4 Door Was: $800.00 Now: $650.00 |
|
|
| In Stock, Ready to Ship! (18 x 8.5) Mitsubishi, Nissan Was: $2,240.00 Now: $2,040.00 |
|
|
| In Stock, Free Shipping* Honda - Civic Si (2006-Up) 2/4 Door Was: $4,295.00 Now: $3,650.75 |
|
|
| In Stock, Ready to Ship! |
|
|
| In Stock, Free Shipping* Universal Applicataion (Wide Band Gauge) Was: $315.00 Now: $260.00 |
|
|
|
|
|
| In Stock, Ready to Ship! Was: $75.00 Now: $25.00 |
|
|
| In Stock, Ready to Ship! Honda - Civic (1992-00) 2/4 Door Was: $500.00 Now: $450.00 |
|
|
| In Stock, Ready to Ship! Universal Application Was: $50.00 Now: $40.00 |
|
|
|
|
|
| Authorized Dealer ! |
|
|
| In Stock, Ready to Ship! Universal Application (Black Avus / White Seam) Was: $700.00 Now: $600.00 |
|
|
| In Stock, Ready to Ship! Universal Application ---> "Rare" Color Was: $650.00 Now: $550.00 |
|
|
| In Stock, Ready to Ship! Dodge Ram (2003-08) 5.7L Hemi Ford F150 (2004-08) 4.6L, 5.4L Ford Mustang GT (2004-08) 4.6L V8 GM Pickup / SUV’s (1999-07) 4.8L, 5.3L, 6.0L, 8.1L Was: $440.00 Now: $360.00 |
|
|
| In Stock, Ready to Ship! Universal Application (2-Bolt Design) Was: $285.00 Now: $235.00 |
|
|
| In Stock, Free Shipping* Universal Application (Chevy, Mazda, Nissan, Scion) Was: $445.00 Now: $400.00 |
|
|
| In Stock, Ready to Ship! Application Application Was: $300.00 Now: $280.00 |
|
|
| In Stock, Free Shipping* Universal Application Was: $100.00 Now: $75.00 |
|
|
| In Stock, Ready to Ship! Universal Application: (23.6" L x 11.0" H x 3.0" D) 2.75" Inlet Was: $270.00 Now: $229.50 |
|
|
| In Stock, Free Shipping* Honda (B-Series) Engine Was: $1,200.00 Now: $1,050.00 |
|
|
| In Stock, Free Shipping* Honda (B-Series) Engine Was: $1,300.00 Now: $1,150.00 |
|
|
| In Stock, Ready to Ship! Honda (B-Series) Engines Was: $1,970.00 Now: $1,580.00 |
|
|
| In Stock, Ready to Ship! Honda (B-Series) Engine Was: $300.00 Now: $225.00 |
|
|
| In Stock, Free Shipping* Honda (DA, EF) Was: $805.00 Now: $645.00 |
|
|
| In Stock, Free Shipping* Honda (DC, EG, EK, Del Sol) Was: $805.00 Now: $645.00 |
|
|
| In Stock, Ready to Ship! Mitsubishi - Lancer (2003-Up) EVO 8/9 Was: $645.00 Now: $520.00 |
|
|
| In Stock, Ready to Ship! 17 x 7.0 (+42mm) 4 x 100 Was: $1,200.00 Now: $1,000.00 |
|
|
| In Stock, Ready to Ship! 18 x 7.5 (+48mm) 5 x 114.3 Was: $1,480.00 Now: $1,200.00 |
|
|
| In Stock, Ready to Ship! Fit Mosts: Acura, Honda, Ford, Mazda, Mitsubishi, Nissan, Subaru WRX 05+, Toyota 18 x 7.5 (+48mm) 5 x 114.3 Was: $1,280.00 Now: $1,000.00 |
|
|
| In Stock, Ready to Ship! Fit Mosts: Acura, Honda, Ford, Mazda, Mitsubishi, Nissan, Subaru WRX 05+, Toyota 18 x 7.5 (+48mm) 5 x 114.3 ---> (60mm Lip) Was: $1,960.00 Now: $1,600.00 |
|
|
| In Stock, Ready to Ship! Fit Mosts: Acura, Honda, Ford, Mazda, Mitsubishi, Nissan, Subaru WRX 05+, Toyota 19 x 7.5 (+42mm) 5 x 114.3 ---> (66mm Lip) Was: $2,040.00 Now: $1,740.00 |
|
|
| In Stock, Ready to Ship! Fits: Mitsubishi - Lancer EVO 8/9 18 x 8.5 (+30mm) 5 x 114.3 Was: $2,480.00 Now: $2,280.00 |
|
|
| In Stock, Ready to Ship! Honda - Civic (1992-00) SOHC Was: $500.00 Now: $400.00 |
|
|
| In Stock, Ready to Ship! Honda - Civic (1992-00) SOHC Was: $525.00 Now: $400.00 |
|
|
| In Stock, Ready to Ship! Nissan - Sentra (2000-03) 1.8L Was: $500.00 Now: $400.00 |
|
|
| In Stock, Ready to Ship! Honda - Accord (1994-97) 4 Door Was: $1,300.00 Now: $800.00 |
|
| ========================================================================================= We also accept orders over the phone................... Please have your item number ready................... Thanks. A shipping charge will be added to your order......................... unless picked up in person from our local store. UPS Ground shipping rates are base on the actual Weight, Size, and your shipping address ZIP Code. Some selected items are available with Free Shipping. All orders are usually shipped the next Business Day. We will email you a Tracking Number once your package is ready and should arrive within 3-10 Business Days. We ship to customers in the Continental United States only. (No International Sales, No Exception.) We can not ship to P.O. boxes, Army Post Office (APO) or Fleet Post Office (FPO) boxes. Prices are subject to changes without notice. We are not responsible for typographic errors. Thank you for browsing our website. Contact Sales@PhantasmUSA.com with any questions. * Please include your Name, Phone #, and Shipping Info... along with the Year, Make, & Model of your vehicle. |